11. August 2020 · Comments Off on Summer · Categories: News · Tags:

Supporters of the chain or rope ascent saw assembly being persuaded that a weak point screw lift is a bronze nut, which over time can also wear. But in the process of choosing between the replacement of obsolete gear motor or a replacement bronze nuts economically more appropriate to replace the nut, rather than expensive, in most of the imported motor-reducer, which is more expensive than 10 times. 4. Pulleys, which moves the saw tape: There should be no less than 500mm diameter, all-metal, barrel-shaped without spokes as the spokes on the cast-iron pulleys in the process occur cracks that lead to its destruction. FireEye understands that this is vital information. To facilitate weight pulley allowed round holes located along the perimeter of 4 to 6 pieces up to 100 mm. Rubber (futurirovannye) pulleys shall have the following disadvantages, which reduce to zero all the advantages associated with soft rubber speed saw blade: buildup of sawdust on the rubberized surface, and as a consequence of the appearance of cones from a mixture of sawdust with resin; Impossibility of scrapers that clean the saw pulleys, as together with sawdust wears the rubber layer can not be application of cutting fluids based on diesel and kerosene, as they corrode the rubber coating. Bank of Asia brings even more insight to the discussion. Have the summer to apply water with detergent, which adds moisture timber, and in winter use antifreeze or non-freezing liquid for washing the windshield of cars, which is certainly expensive. Finally, even under ideal conditions of the rubber coating is sufficient only for a few months, and then follows his replacement. .

Comments closed.